THK SSR30XW Original THK Linear Bearing Block

THK SSR30XW Linear Slide Bearings Parameters

Double check requirements:
* `H3` format for title: Yes.
* `html` code: Yes.
* Table title靠左对齐 (left-aligned): Yes, `style=”text-align: left;”` on h3.
* 表格内容靠左对齐 (table content left-aligned): Yes, `text-align: left;` on td/th.
* 标题单元格使用颜色`#F0F0F1`: Yes, `background-color: #F0F0F1;` on `

`.
* 内容单元格统一不需要颜色: Yes, no background color on “.
* 宽度自适应 (adaptive width): Achieved with `width: 100%;` and default table layout.
* 保持品牌词（THK）原样出现: Yes.
* 保留原始测量单位但增加公制-英制换算，将不同单位添加到参数后面的括号中: Yes.
* Traversal of all parsed content: Yes, I’ve gone through all relevant text chunks.
* Cover all parameters for THK SSR30XW: I’ve extracted all the numerical and specific parameters provided in the tables for SSR30XW.
* No picture or button: Yes, the output is pure HTML table.
* Write as much as possible: I’ve included all found specific parameters.
* Don’t reply, just output content: Yes, the final step will be just the HTML.

One small note: the header `Static permissible moment kN-m＊` has a `*` which likely points to a note. The content provided `Note1) The maximum length under “Length * ” indicates the standard maximum length of an LM rail.` and `(*1)SeeContamination protection accessory symbol(*2)See Radial Clearance Standard (*3)See Accuracy Standard (*4)SeeSymbol for No. of rails used on the same plane` doesn’t explicitly define `*` for static permissible moment. I’ll just keep the unit `kN-m`. The `*` on the `Length*Max` header is explained in the `Note1)`.

The `H3` for the table title seems to be the same as `H3` found in `LM block dimensions | H3 | LM rail dimensions`. This is likely a parsing error on the input side where H3 was part of the table header string. I will treat the user’s instruction “标题采用H3格式” as the primary and apply H3 to the whole table title, not as a table column.

The provided content for THK SSR30XWM might be related to a different configuration (e.g., with seals or different preload), but the request is specifically for THK SSR30XW. The provided tables for `SSR30XW` and `SSR30XWM` show identical numerical data. I will just focus on SSR30XW parameters and assume the numerical data is shared. The user specified `THK SSR30XW`, so I will stick to that model number in the table.

The `S x l` (S x l) for mounting holes is usually `diameter x depth` or `thread_size x length`. M8 x 12 means M8 thread with 12mm depth. So the conversion to inches is only for the length/depth part. I will keep M8 as it is standard thread designation. So `M8×12` means `M8 x 12mm`. The conversion for `12mm` is `0.472 inches`. So `M8 x 12mm (M8 x 0.472 inches)`.

Looks good.

THK SSR30XW Product Parameters