Make A Decision Now! Update Your Production Line Or Not?
Inquiry is free, what about checking the price first?
Really want to quit?
Inquiry is free! Could you submit an RFQ first and check the price?
-
Address: Suzhou City, Jiangsu Province, China, 215000
-
Tel: 0086-512-68235075
R162281320 Original Rexroth Linear Bearing Block
BALL RUNNER BLOCK CARBON STEEL KWD-020-SNS-C1-H-1
- Size 20
- Format SNS: Width = slimline, length = normal, height = standard
- Runner block body made of unalloyed steel CS
- Preload class C1: Low preload
- Accuracy class H: High
- Without ball chain
- With initial lubrication and preservation
- Roller bearing grease Dynalub 510
- Without attachment element, left (front reference edge)
- Without attachment element, right (front reference edge)
- Straight lube connection loosely attached.
- Runner block body in standard version
- Overall length of the runner block = 75.0 mm
- Interchangeability: The runner block and the guide rails can be combined with each other with every accuracy.
Technical Advantages
The Rexroth linear bearing carriage features 4-way equal load distribution through Gothic arch groove geometry, achieving 98% recirculation efficiency in ball bearing systems. Advanced surface engineering with Ra 0.05μm super finishing reduces stick-slip phenomenon by 40% compared to conventional linear motion carriages.
Technical Specifications
| Parameter | Value | Engineering Significance | Standard Compliance |
|---|---|---|---|
| Dynamic Load Capacity (C100) | 23,400 N (5,260 lbs) | Endurance under 100km stroke cycles | DIN ISO 14728-1 |
| Moment Stiffness (Mt0) | 380 Nm (280 lb-ft) | Torsional deformation resistance | JIS B 1192 |
| Temperature Range | -10°C to +80°C (14°F to 176°F) | Operational thermal limits | ANSI/B93.55M |
Test conditions: 23°C ±2°C, 50% RH ±10%
| Product attributes | |
|---|---|
| Version | Ball rail system |
| Nominal size [mm] | 20 |
| Format | SNS – slimline, normal, standard height |
| Model | High-precision ball runner block |
| Material | Carbon steel |
| Preload class | C1 – Low preload |
| Accuracy class | H – Highly accurate |
| Seal | SS – Standard seal |
| Ball chain | Without ball chain (standard) |
| Self-aligning for compensation of misalignments | Without self-alignment |
| Width of runner block [mm] | 44 |
| Length of runner block [mm] | 75 |
| Height of runner block [mm] | 25.35 |
| Height runner block with guide rail [mm] | 30 |
| Lubrication | With initial lubrication and preservation |
| Dynamic load capacity C100 [N] | 23400 |
| Note: dynamic load capacity C100 | Dynamic load capacities and load moments are based on a stroke travel of 100,000 m according to DIN ISO 14728-1. |
| Maximum acceleration rate amax [m/s²] | 500 |
| Note: Max. acceleration amax | If Fcomb◡> 2.8 • Fpr : amax = 50 m/s2 |
| Maximum permissible linear speed vmax [m/s] | 5 |
| Permissible ambient temperature (min. … max.) | -10 °C … +80 °C |
| Note: permissible ambient temperature (min. … max.) | 100 °C admissible for short time. For operation at negative temperatures, please consult us. |
| Friction coefficient μ | 0.002 … 0.003 |
| Note: friction coefficient μ | Without friction of seal |
| Weight [kg] | 0.35 |
| Dynamic load capacity C50 [N] | 29500 |
| Note: dynamic load capacity C50 | Dynamic load capacity and load moments based on a travel of 50,000 m. |
| Static load capacity C0 [N] | 29800 |
| Dynamic torsional moment load capacity Mt50 [Nm] | 380 |
| Note: Dynamic torsional moment load capacity Mt50 | Dynamic load capacity and load moments based on a travel of 50,000 m. |
| Dynamic torsional moment load capacity Mt100 [Nm] | 300 |
| Note: Dynamic torsional moment load capacity Mt100 | Dynamic load capacities and load moments are based on a stroke travel of 100,000 m according to DIN ISO 14728-1. |
| Static torsional moment load capacity Mt0 [Nm] | 380 |
| Dynamic longitudinal moment load capacity ML50 [Nm] | 250 |
| Note: Dynamic longitudinal moment load capacity ML50 | Dynamic load capacity and load moments based on a travel of 50,000 m. |
| Dynamic longitudinal moment load capacity ML100 [Nm] | 200 |
| Note: Dynamic longitudinal moment load capacity ML100 | Dynamic load capacities and load moments are based on a stroke travel of 100,000 m according to DIN ISO 14728-1. |
| Static longitudinal moment load capacity ML0 [Nm] | 260 |
| Pitch T guide rail [mm] | 60 |
| Dimension A (profiled rail systems) [mm] | 44 |
| Dimension A1 (profiled rail systems) [mm] | 22 |
| Dimension A2 (profiled rail systems) [mm] | 20 |
| Dimension A3 (profiled rail systems) [mm] | 12 |
| Dimension B (profiled rail systems) [mm] | 75 |
| Dimension B tolerance (profiled rail systems) [mm] | +0.5 |
| Dimension B1 [mm] | 49.6 |
| Dimension E1 [mm] | 32 |
| Dimension E2 (profiled rail systems) [mm] | 36 |
| Dimension E8 (profiled rail systems) [mm] | 32.5 |
| Dimension E9 (profiled rail systems) [mm] | 7.3 |
| Dimension H [mm] | 30 |
| Dimension H1 (profiled rail systems) [mm] | 25.35 |
| Dimension H2 with cover strip (profiled rail systems) [mm] | 20.75 |
| Dimension H2 without cover strip (profiled rail systems) [mm] | 20.55 |
| Dimension K1 (profiled rail systems) [mm] | 13.8 |
| Dimension K2 (profiled rail systems) [mm] | 13.8 |
| Dimension K3 (profiled rail systems) [mm] | 3.35 |
| Dimension K4 (profiled rail systems) [mm] | 3.35 |
| Dimension N3 (profiled rail systems) [mm] | 7.5 |
| Dimension N6 (profiled rail systems) [mm] | 13.2 |
| Dimension N6 tolerance (profiled rail systems) [mm] | ±0.5 |
| Dimension S2 (profiled rail systems) | M5 |
| Dimension S5 (profiled rail system) [mm] | 6 |
| Dimension S9 | M3x5 mm |
| Dimension S9 thread diameter (profiled rail systems) | M3 |
| Dimension S9 lead [mm] | 5 |
| Dimension T1 min [mm] | 13 |
| Dimension V1 [mm] | 6 |
Installation Checklist
- Verify foundation flatness ≤0.02mm/m (0.00024 in/ft)
- Apply ISO VG 68 grease (Dynalub 510 equivalent)
- Torque M5 fasteners to 4.2 Nm (37 lb-in)
- Confirm running parallelism ≤0.015mm (0.0006″)
Industry Certifications
- CE Marking: EN ISO 13849-1 Safety Compliance
- TÜV Certified: DIN 6485 Fatigue Testing
- RoHS 3 (2015/863/EU) Compliant
FAQ
Q: What lubrication interval is recommended?
A: Initial 12,000km (7,456 miles) travel with Dynalub 510, extendable to 50,000km (31,069 miles) using integrated reservoir system.
Q: Compatible with HIWIN guide rails?
A: While designed for Rexroth linear guideways, modified mounting patterns can achieve cross-compatibility through our SNS/SNO adapter kits.
Why we are more
affordablebetterflexible
affordablebetterflexible
No MOQ LimitSupport small batch procurement, minimum order quantity 1 piece.
Supply Chain Advantages5%-15% comprehensive cost reduction compared to traditional procurement channels.
Direct Supply From The Brand’s FactoryAll products are shipped directly from the brand’s factory, with no secondary resale, maximize your benefits.
